Development of Strain-Induced Quantum Well Intermixing Technique on InGaP/InAlGaP Laser Structures and Demonstration of First Orange Laser Diode

  • Ahmad Al-Jabr

Student thesis: Doctoral Thesis


Laser Diodes (LD) have numerous applications for industry, military, medicine and communications. The first visible LD was invented in 1962 by Nick Holonyak, emitted at 710 nm (red). In 1990s, Shuji Nakamura invented the blue and green Light Emitting Diodes (LED) and later LDs. The production of LDs emitting between 532- 632 nm has been severely lagging behind the rest of the visible spectrum. Yellow and orange LDs are still not accessible due to the lack of successfully grown material with high optical efficiency. AlGaInP is the quaternary compound semiconductor used to grow green to red LEDs and red LDs. At a material composition that is supposed to lase below 630 nm, the optical efficiency becomes low due to the oxygen-related defects associated with high Al content. The quantum well intermixing (QWI) is a post-growth process that is applied to laser structure to tune the wavelength of laser. Until now, there are limited reports on successful intermixing of InGaP/InAlGaP laser structures while maintaining the crystal quality. In this work, we introduced a novel intermixing process that utilizes the high strain induced by the dielectric film during annealing to initiate the intermixing. We deposited SiO2 capping by plasma-enhanced chemical vapor deposition (PECVD) onto the InGaP/InAlGaP laser structure emitting at 635 nm, and then annealed the structure up to 950 Celsius for different periods of time, resulting in an astonishing 100 nm blueshift. This blueshift allowed us to produce an unprecedented shorter wavelength orange lasers emitting at 608 nm. For low degree of intermixing, we have noticed an increase in the intensity of the photoluminescence (PL) signal. The improvement in the PL signal was translated to a reduction in threshold current. We implemented the technique on an LED structure with Al-rich QWs emitting at 590 nm. Significant increase in the PL intensity (20 folds) was observed. By analyzing the improved structure, we observed reduction in oxygen contamination. This may represent a solution to the oxygen-related defect. The thesis opens the door for major steps forward in GaInP/AlGaInP structures for manufacturing efficient optoelectronic devices in the green, yellow and orange visible range.
Date of AwardAug 2016
Original languageEnglish (US)
Awarding Institution
  • Computer, Electrical and Mathematical Sciences and Engineering
SupervisorBoon Ooi (Supervisor)


  • Diode
  • Laser
  • Quantum Well
  • Orange
  • AlGaInP
  • Intermixing

Cite this