Sustainable wastewater treatment and recycling in membrane manufacturing

Mayamin Razali, Jeong F. Kim, Martin Attfield, Peter M. Budd, Enrico Drioli, Young Moo Lee, Gyorgy Szekely*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

234 Scopus citations

Abstract

It is widely accepted that membrane technology is a green and sustainable process; however, it is not well known that the membrane fabrication process itself is quite far from green, with more than 50 billion liters of wastewater being generated every year contaminated with toxic solvents such as DMF and NMP. This urgent challenge is often overlooked and recent attempts to improve the sustainability of membrane fabrication have been limited to the replacement of toxic solvents with greener alternatives. Our recent survey from membrane industries indicates that such wastewater contributes to more than 95% of the total waste generated during the membrane fabrication process, and their disposal is considered cumbersome. Hence, recycling wastewater in the membrane industry is a pressing challenge to be resolved to augment the rapidly growing membrane market. In this work, a continuous wastewater treatment process is proposed and the quality of the recycled water was validated through membrane fabrication and performance tests. Seven different classes of adsorbents - graphene, polymers with intrinsic microporosity, imprinted polymers, zeolites, metal organic frameworks, activated carbon, and resins - were evaluated. The isotherm and kinetic behaviors of the best adsorbents have been fully characterized and the adsorbent regenerability without any performance loss has been confirmed for up to 10 wastewater treatment cycles. It has been demonstrated that over 99% of the organic impurities in the wastewater can be successfully removed and the recycled water can be reused without adverse effects on the final membrane performance. The proposed wastewater treatment technique can reduce the process mass intensity (PMI) of membrane fabrication by 99.9% per m2 of the membrane produced. The required energy duty for different regeneration methods and wastewater treatment methods revealed that the adsorption technology is the most effective method, with the lowest energy requirement of about 1200 kJ per m2 of the membrane produced.

Original languageEnglish (US)
Pages (from-to)5196-5205
Number of pages10
JournalGreen Chemistry
Volume17
Issue number12
DOIs
StatePublished - Sep 10 2015
Externally publishedYes

Bibliographical note

Publisher Copyright:
© The Royal Society of Chemistry.

ASJC Scopus subject areas

  • Environmental Chemistry
  • Pollution

Fingerprint

Dive into the research topics of 'Sustainable wastewater treatment and recycling in membrane manufacturing'. Together they form a unique fingerprint.

Cite this