Abstract
A soot model was developed based on the recently proposed PAH growth mechanism for C1-C4 gaseous fuels (KAUST PAH Mechanism 2, KM2) that included molecular growth up to coronene (A7) to simulate soot formation in counterflow diffusion flames of ethylene and its binary mixtures with methane, ethane and propane based on the method of moments. The soot model has 36 soot nucleation reactions from 8 PAH molecules including pyrene and larger PAHs. Soot surface growth reactions were based on a modified hydrogen-abstraction-acetylene-addition (HACA) mechanism in which CH3, C3H3 and C2H radicals were included in the hydrogen abstraction reactions in addition to H atoms. PAH condensation on soot particles was also considered. The experimentally measured profiles of soot volume fraction, number density, and particle size were well captured by the model for the baseline case of ethylene along with the cases involving mixtures of fuels. The simulation results, which were in qualitative agreement with the experimental data in the effects of binary fuel mixing on the sooting structures of the measured flames, showed in particular that 5% addition of propane (ethane) led to an increase in the soot volume fraction of the ethylene flame by 32% (6%), despite the fact that propane and ethane are less sooting fuels than is ethylene, which is in reasonable agreement with experiments of 37% (14%). The model revealed that with 5% addition of methane, there was an increase of 6% in the soot volume fraction. The average soot particle sizes were only minimally influenced while the soot number densities were increased by the fuel mixing. Further analysis of the numerical data indicated that the chemical cross-linking effect between ethylene and the dopant fuels resulted in an increase in PAH formation, which led to higher soot nucleation rates and therefore higher soot number densities. On the other hand, the rates of soot surface growth per unit surface area through the HACA mechanism were similar among the different fuel mixing cases, although slightly lower compared with ethylene base case. The increased soot nucleation rates by fuel mixing and similar soot surface growth rates (per unit surface area) help to explain the increased soot volume fraction/number density and similar average sizes among the tested cases.
Original language | English (US) |
---|---|
Pages (from-to) | 586-596 |
Number of pages | 11 |
Journal | Combustion and Flame |
Volume | 162 |
Issue number | 3 |
DOIs | |
State | Published - Mar 2015 |
Bibliographical note
KAUST Repository Item: Exported on 2020-10-01Acknowledgements: This study was supported by Saudi Aramco and KAUST.
ASJC Scopus subject areas
- Energy Engineering and Power Technology
- General Physics and Astronomy
- General Chemical Engineering
- General Chemistry
- Fuel Technology