Single-step post-production treatment of lead acetate precursor-based perovskite using alkylamine salts for reduced grain-boundary related film defects

Keyphrases

• Active Layer 100%
• Passivated 100%
• Perovskite 100%
• Grain Boundary 100%
• Film Defects 100%
• Alkylamine 100%
• Acetate Precursor 100%
• Lead Acetate 100%
• Device-based 50%
• Surface Treatment 50%
• Thin Film Solar Cells 50%
• Treatment Strategy 50%
• Carrier Recombination 50%
• Fill Factor 50%
• Factor Value 50%
• Energy Use 50%
• Non-radial 50%
• Nonradiative Recombination Center 50%
• Power Conversion Efficiency 50%
• Defect Density 50%
• Control Device 50%
• Open-circuit Voltage 50%
• Perovskite Solar Cells (PeSCs) 50%
• MAPbI3 50%
• Trap Density 50%
• Methylammonium Lead Iodide 50%
• Bulk Defects 50%
• Interface Problem 50%
• Perovskite Film 50%
• V-factor 50%
• Organic Amine 50%
• Pre-annealing 50%
• Stability of Perovskite Solar Cells 50%
• Dye-sensitized 50%
• Amine Salt 50%
• Precursor Film 50%
• Treatment Processing 50%
• Methylammonium Iodide 50%
• High-quality Films 50%
• Wet Processing 50%
• Mixed Perovskite 50%

Material Science

• Perovskites 100%
• Film 100%
• Grain Boundary 100%
• Perovskite Solar Cell 66%
• Electronic Circuit 33%
• Control Component 33%
• Annealing 33%
• Density 33%
• Solar Cell 33%
• Thin Films 33%

Engineering

• Defects 100%
• Grain Boundary 100%
• Perovskite Solar Cells 50%
• Active Layer 50%
• Power Conversion Efficiency 25%
• Fill Factor 25%
• Research Group 25%
• Film Solar Cell 25%
• Recombination Centre 25%
• Thin Films 25%
• Radiative Recombination 25%
• Open Circuit Voltage 25%