Abstract
The objective of the study is first to examine the optimal transient growth of Görtler-Hämmerlin perturbations in swept Hiemenz flow. This configuration constitutes a model of the flow in the attachment-line boundary layer at the leading-edge of swept wings. The optimal blowing and suction at the wall which minimizes the energy of the optimal perturbations is then determined. An adjoint-based optimization procedure applicable to both problems is devised, which relies on the maximization or minimization of a suitable objective functional. The variational analysis is carried out in the framework of the set of linear partial differential equations governing the chordwise and wall-normal velocity fluctuations. Energy amplifications of up to three orders of magnitude are achieved at low spanwise wavenumbers(k ∼ 2000) and large sweep Reynolds number (Re ∼ 2000) Optimal perturbations consist of spanwise travelling chordwise vortices, with a vorticity distribution which is inclined against the sweep. Transient growth arises from the tilting of the vorticity distribution by the spanwise shear via a two-dimensional Orr mechanism acting in the basic flow dividing plane. Two distinct regimes have been identified: for k ≲ 0.25, vortex dipoles are formed which induce large spanwise perturbation velocities; for k ≲ 0.25, dipoles are not observed and only the Orr mechanism remains active. The optimal wall blowing control yields for instance an 80% decrease of the maximum perturbation kinetic energy reached by optimal disturbances at Re = 550 and k = 0.25 The optimal wall blowing pattern consists of spanwise travelling waves which follow the naturally occurring vortices and qualitatively act in the same manner as a more simple constant gain feedback control strategy. © 2006 Cambridge University Press.
Original language | English (US) |
---|---|
Pages (from-to) | 11-45 |
Number of pages | 35 |
Journal | Journal of Fluid Mechanics |
Volume | 566 |
DOIs | |
State | Published - Jan 1 2006 |
Externally published | Yes |
Bibliographical note
Generated from Scopus record by KAUST IRTS on 2022-09-13ASJC Scopus subject areas
- Mechanics of Materials
- Mechanical Engineering
- Condensed Matter Physics