Morphology-controlled synthesis and a comparative study of the physical properties of SnO2 nanostructures: From ultrathin nanowires to ultrawide nanobelts

Z. Zhang; J. Gao; L. M. Wong; J. G. Tao; L. Liao; Z. Zheng; G. Z. Xing; H. Y. Peng; T. Yu; Z. X. Shen; C. H.A. Huan; S. J. Wang; T. Wu

doi:10.1088/0957-4484/20/13/135605

Morphology-controlled synthesis and a comparative study of the physical properties of SnO₂ nanostructures: From ultrathin nanowires to ultrawide nanobelts

Z. Zhang, J. Gao, L. M. Wong, J. G. Tao, L. Liao, Z. Zheng, G. Z. Xing, H. Y. Peng, T. Yu, Z. X. Shen, C. H.A. Huan, S. J. Wang, T. Wu^*

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

57 Scopus citations

Abstract

Controlled synthesis of one-dimensional materials, such as nanowires and nanobelts, is of vital importance for achieving the desired properties and fabricating functional devices. We report a systematic investigation of the vapor transport growth of one-dimensional SnO₂ nanostructures, aiming to achieve precise morphology control. SnO₂ nanowires are obtained when SnO₂ mixed with graphite is used as the source material; adding TiO₂ into the source reliably leads to the formation of nanobelts. Ti-induced modification of crystal surface energy is proposed to be the origin of the morphology change. In addition, control of the lateral dimensions of both SnO₂ nanowires (from ∼15 to ∼115 nm in diameter) and nanobelts (from ∼30 nm to ∼2 νm in width) is achieved by adjusting the growth conditions. The physical properties of SnO₂ nanowires and nanobelts are further characterized and compared using room temperature photoluminescence, resonant Raman scattering, and field emission measurements.

Original language	English (US)
Article number	135605
Journal	Nanotechnology
Volume	20
Issue number	13
DOIs	https://doi.org/10.1088/0957-4484/20/13/135605
State	Published - 2009
Externally published	Yes

ASJC Scopus subject areas

Bioengineering
General Chemistry
General Materials Science
Mechanics of Materials
Mechanical Engineering
Electrical and Electronic Engineering

Access to Document

10.1088/0957-4484/20/13/135605

Cite this

Zhang, Z., Gao, J., Wong, L. M., Tao, J. G., Liao, L., Zheng, Z., Xing, G. Z., Peng, H. Y., Yu, T., Shen, Z. X., Huan, C. H. A., Wang, S. J., & Wu, T. (2009). Morphology-controlled synthesis and a comparative study of the physical properties of SnO₂ nanostructures: From ultrathin nanowires to ultrawide nanobelts. Nanotechnology, 20(13), Article 135605. https://doi.org/10.1088/0957-4484/20/13/135605

@article{ff55cb85cf7f40bfbe98bff745c97c9f,

title = "Morphology-controlled synthesis and a comparative study of the physical properties of SnO2 nanostructures: From ultrathin nanowires to ultrawide nanobelts",

abstract = "Controlled synthesis of one-dimensional materials, such as nanowires and nanobelts, is of vital importance for achieving the desired properties and fabricating functional devices. We report a systematic investigation of the vapor transport growth of one-dimensional SnO2 nanostructures, aiming to achieve precise morphology control. SnO2 nanowires are obtained when SnO2 mixed with graphite is used as the source material; adding TiO2 into the source reliably leads to the formation of nanobelts. Ti-induced modification of crystal surface energy is proposed to be the origin of the morphology change. In addition, control of the lateral dimensions of both SnO2 nanowires (from ∼15 to ∼115 nm in diameter) and nanobelts (from ∼30 nm to ∼2 νm in width) is achieved by adjusting the growth conditions. The physical properties of SnO2 nanowires and nanobelts are further characterized and compared using room temperature photoluminescence, resonant Raman scattering, and field emission measurements.",

author = "Z. Zhang and J. Gao and Wong, {L. M.} and Tao, {J. G.} and L. Liao and Z. Zheng and Xing, {G. Z.} and Peng, {H. Y.} and T. Yu and Shen, {Z. X.} and Huan, {C. H.A.} and Wang, {S. J.} and T. Wu",

year = "2009",

doi = "10.1088/0957-4484/20/13/135605",

language = "English (US)",

volume = "20",

journal = "Nanotechnology",

issn = "0957-4484",

publisher = "IOP Publishing",

number = "13",

}

Zhang, Z, Gao, J, Wong, LM, Tao, JG, Liao, L, Zheng, Z, Xing, GZ, Peng, HY, Yu, T, Shen, ZX, Huan, CHA, Wang, SJ & Wu, T 2009, 'Morphology-controlled synthesis and a comparative study of the physical properties of SnO₂ nanostructures: From ultrathin nanowires to ultrawide nanobelts', Nanotechnology, vol. 20, no. 13, 135605. https://doi.org/10.1088/0957-4484/20/13/135605

TY - JOUR

T1 - Morphology-controlled synthesis and a comparative study of the physical properties of SnO2 nanostructures

T2 - From ultrathin nanowires to ultrawide nanobelts

AU - Zhang, Z.

AU - Gao, J.

AU - Wong, L. M.

AU - Tao, J. G.

AU - Liao, L.

AU - Zheng, Z.

AU - Xing, G. Z.

AU - Peng, H. Y.

AU - Yu, T.

AU - Shen, Z. X.

AU - Huan, C. H.A.

AU - Wang, S. J.

AU - Wu, T.

PY - 2009

Y1 - 2009

N2 - Controlled synthesis of one-dimensional materials, such as nanowires and nanobelts, is of vital importance for achieving the desired properties and fabricating functional devices. We report a systematic investigation of the vapor transport growth of one-dimensional SnO2 nanostructures, aiming to achieve precise morphology control. SnO2 nanowires are obtained when SnO2 mixed with graphite is used as the source material; adding TiO2 into the source reliably leads to the formation of nanobelts. Ti-induced modification of crystal surface energy is proposed to be the origin of the morphology change. In addition, control of the lateral dimensions of both SnO2 nanowires (from ∼15 to ∼115 nm in diameter) and nanobelts (from ∼30 nm to ∼2 νm in width) is achieved by adjusting the growth conditions. The physical properties of SnO2 nanowires and nanobelts are further characterized and compared using room temperature photoluminescence, resonant Raman scattering, and field emission measurements.

AB - Controlled synthesis of one-dimensional materials, such as nanowires and nanobelts, is of vital importance for achieving the desired properties and fabricating functional devices. We report a systematic investigation of the vapor transport growth of one-dimensional SnO2 nanostructures, aiming to achieve precise morphology control. SnO2 nanowires are obtained when SnO2 mixed with graphite is used as the source material; adding TiO2 into the source reliably leads to the formation of nanobelts. Ti-induced modification of crystal surface energy is proposed to be the origin of the morphology change. In addition, control of the lateral dimensions of both SnO2 nanowires (from ∼15 to ∼115 nm in diameter) and nanobelts (from ∼30 nm to ∼2 νm in width) is achieved by adjusting the growth conditions. The physical properties of SnO2 nanowires and nanobelts are further characterized and compared using room temperature photoluminescence, resonant Raman scattering, and field emission measurements.

UR - http://www.scopus.com/inward/record.url?scp=65549149128&partnerID=8YFLogxK

U2 - 10.1088/0957-4484/20/13/135605

DO - 10.1088/0957-4484/20/13/135605

M3 - Article

C2 - 19420508

AN - SCOPUS:65549149128

SN - 0957-4484

VL - 20

JO - Nanotechnology

JF - Nanotechnology

IS - 13

M1 - 135605

ER -

Morphology-controlled synthesis and a comparative study of the physical properties of SnO₂ nanostructures: From ultrathin nanowires to ultrawide nanobelts

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this