Mass and position determination in MEMS mass sensors: a theoretical and an experimental investigation

Adam M. Bouchaala, Ali H. Nayfeh, Nizar Jaber, Mohammad I. Younis

Research output: Contribution to journalArticlepeer-review

36 Scopus citations

Abstract

We present a method to determine accurately the position and mass of an entity attached to the surface of an electrostatically actuated clamped-clamped microbeam implemented as a mass sensor. In the theoretical investigation, the microbeam is modeled as a nonlinear Euler-Bernoulli beam and a perturbation technique is used to develop a closed-form expression for the frequency shift due to an added mass at a specific location on the microbeam surface. The experimental investigation was conducted on a microbeam made of Polyimide with a special lower electrode to excite both of the first and second modes of vibration. Using an ink-jet printer, we deposited droplets of polymers with a defined mass and position on the surface of the microbeam and we measured the shifts in its resonance frequencies. The theoretical predictions of the mass and position of the deposited droplets match well with the experimental measurements.
Original languageEnglish (US)
Pages (from-to)105009
JournalJournal of Micromechanics and Microengineering
Volume26
Issue number10
DOIs
StatePublished - Aug 31 2016

Bibliographical note

KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: This research has been supported by KAUST.

Fingerprint

Dive into the research topics of 'Mass and position determination in MEMS mass sensors: a theoretical and an experimental investigation'. Together they form a unique fingerprint.

Cite this