Inkjet Printed RF Sensor Array For Lung Disease Detection

M. Tayyab; M.S. Sharawi; Atif Shamim

doi:10.1049/cp.2018.1224

Inkjet Printed RF Sensor Array For Lung Disease Detection

M. Tayyab, M.S. Sharawi, Atif Shamim

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

We propose an RF sensor array for lung disease detection. The size of the sensor array is 4cm*89.4cm. The sensor consists of 38 electrodes and 37 ports. The first two electrodes are optimized to operate at 60 MHz and act as a signal exciter. The remaining 36 electrodes receive the radiated field. The transmission coefficients Si1 at each passive port are calculated using HFSS software. An equation was designed for dielectric constant estimation using the Least Squares (LS) method. The sensor is fabricated using Inkjet printing. The experiments of the fabricated sensor were conducted on an average adult human chest elliptical model.

Original language	English (US)
Title of host publication	12th European Conference on Antennas and Propagation (EuCAP 2018)
Publisher	Institution of Engineering and Technology (IET)
ISBN (Print)	9781785618161
DOIs	https://doi.org/10.1049/cp.2018.1224
State	Published - Nov 20 2018

Bibliographical note

KAUST Repository Item: Exported on 2020-10-01

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1049/cp.2018.1224

https://repository.kaust.edu.sa/bitstream/10754/630032/1/1570397199_Biomedical%20Sensor%20for%20EuCAP_V1.pdf

Cite this

@inproceedings{bc7a2da335c44e83b56e450449658e40,

title = "Inkjet Printed RF Sensor Array For Lung Disease Detection",

abstract = "We propose an RF sensor array for lung disease detection. The size of the sensor array is 4cm*89.4cm. The sensor consists of 38 electrodes and 37 ports. The first two electrodes are optimized to operate at 60 MHz and act as a signal exciter. The remaining 36 electrodes receive the radiated field. The transmission coefficients Si1 at each passive port are calculated using HFSS software. An equation was designed for dielectric constant estimation using the Least Squares (LS) method. The sensor is fabricated using Inkjet printing. The experiments of the fabricated sensor were conducted on an average adult human chest elliptical model.",

author = "M. Tayyab and M.S. Sharawi and Atif Shamim",

note = "KAUST Repository Item: Exported on 2020-10-01",

year = "2018",

month = nov,

day = "20",

doi = "10.1049/cp.2018.1224",

language = "English (US)",

isbn = "9781785618161",

booktitle = "12th European Conference on Antennas and Propagation (EuCAP 2018)",

publisher = "Institution of Engineering and Technology (IET)",

}

TY - GEN

T1 - Inkjet Printed RF Sensor Array For Lung Disease Detection

AU - Tayyab, M.

AU - Sharawi, M.S.

AU - Shamim, Atif

N1 - KAUST Repository Item: Exported on 2020-10-01

PY - 2018/11/20

Y1 - 2018/11/20

N2 - We propose an RF sensor array for lung disease detection. The size of the sensor array is 4cm*89.4cm. The sensor consists of 38 electrodes and 37 ports. The first two electrodes are optimized to operate at 60 MHz and act as a signal exciter. The remaining 36 electrodes receive the radiated field. The transmission coefficients Si1 at each passive port are calculated using HFSS software. An equation was designed for dielectric constant estimation using the Least Squares (LS) method. The sensor is fabricated using Inkjet printing. The experiments of the fabricated sensor were conducted on an average adult human chest elliptical model.

AB - We propose an RF sensor array for lung disease detection. The size of the sensor array is 4cm*89.4cm. The sensor consists of 38 electrodes and 37 ports. The first two electrodes are optimized to operate at 60 MHz and act as a signal exciter. The remaining 36 electrodes receive the radiated field. The transmission coefficients Si1 at each passive port are calculated using HFSS software. An equation was designed for dielectric constant estimation using the Least Squares (LS) method. The sensor is fabricated using Inkjet printing. The experiments of the fabricated sensor were conducted on an average adult human chest elliptical model.

UR - http://hdl.handle.net/10754/630032

UR - http://digital-library.theiet.org/content/conferences/10.1049/cp.2018.1224

U2 - 10.1049/cp.2018.1224

DO - 10.1049/cp.2018.1224

M3 - Conference contribution

SN - 9781785618161

BT - 12th European Conference on Antennas and Propagation (EuCAP 2018)

PB - Institution of Engineering and Technology (IET)

ER -

Inkjet Printed RF Sensor Array For Lung Disease Detection

Abstract

Bibliographical note

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this