Hydrogen permeation properties of Pd-coated V89.8Cr 10Y0.2 alloy membrane using WGS reaction gases

Sungil Jeon, Junghoon Park

Research output: Contribution to journalArticlepeer-review

14 Scopus citations


The influence of co-existing gases on the hydrogen permeation was studied through a Pd-coated V89.8Cr10Y0.2 alloy membrane. Preliminary hydrogen permeation experiments have been confirmed that hydrogen flux was 6.26 ml/min/cm2 for a Pd-coated V 89.8Cr10Y0.2 alloy membrane (thick: 0.5 mm) using pure hydrogen as feed gas. Also, the hydrogen permeation flux decreased with decrease of hydrogen partial pressure at constant pressure when H 2/CO2 and H2/CO2/H2S mixture applied as feed gas respectively and permeation fluxes were satisfied with Sievert's law in different feed conditions. It was found from XRD and SEM results after permeation test that the Pd-coated V89.8Cr 10Y0.2 alloy membrane had good stability and durability for various mixture feeding conditions. Copyright © 2013, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Original languageEnglish (US)
Pages (from-to)6085-6091
Number of pages7
JournalInternational Journal of Hydrogen Energy
Issue number14
StatePublished - May 2013

Bibliographical note

KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: This work was supported by Energy & Resource R&D program (2011201020005B) under the Ministry of Knowledge Economy, Republic of Korea. The authors would like to thank Dr. Eric Fleury for his experimental help in the synthesis of alloy membrane at the Center for High Temperature Energy Materials of the Korean Institute of Science and Technology (KIST).

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Condensed Matter Physics
  • Fuel Technology
  • Renewable Energy, Sustainability and the Environment


Dive into the research topics of 'Hydrogen permeation properties of Pd-coated V89.8Cr 10Y0.2 alloy membrane using WGS reaction gases'. Together they form a unique fingerprint.

Cite this