Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure

Amal M. Alamri; Siu Leung; Mohammad Vaseem; Atif Shamim; Jr-Hau He

doi:10.1109/TED.2019.2911715

Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure

Amal M. Alamri, Siu Leung, Mohammad Vaseem, Atif Shamim, Jr-Hau He

Research output: Contribution to journal › Article › peer-review

119 Scopus citations

Abstract

Photodetectors (PDs) based on organic-inorganic hybrid materials such as graphene and perovskites have recently emerged at the forefront of the research in optoelectronic devices. Despite the remarkable progress in the performance of optoelectronic devices based on hybrid materials, some aspects such as stability have so far not been thoroughly addressed. This paper serves to demonstrate a fully inkjet-printed PD fabricated by hybrid perovskite (CH3NH3PbClx-3I3) layer between the two graphene electrodes as graphene/perovskite/graphene (GPG) heterostructure. The fully inkjet-printed GPG PD is found to be effective for the visible light region, which can be attributed by the high uniformity and low defects of the printed materials. Thus, the GPG PD achieves a high responsivity of 0.53 A/W. Fully inkjet-printed hybrid perovskite PD demonstrated in this paper unveils the facile, potentially large-scale and cost-effective methods for fabrication of hybrid perovskites-based optoelectronic devices, including PDs and solar cells.

Original language	English (US)
Pages (from-to)	2657-2661
Number of pages	5
Journal	IEEE Transactions on Electron Devices
Volume	66
Issue number	6
DOIs	https://doi.org/10.1109/TED.2019.2911715
State	Published - Jun 2019

Bibliographical note

KAUST Repository Item: Exported on 2020-10-01
Acknowledgements: This work was supported in part by the King Abdulaziz City for Science and Technology (KACST) under Grant 1-17-02-002-004 and in part by the King Abdullah University of Science and Technology (KAUST).

Access to Document

10.1109/TED.2019.2911715

https://repository.kaust.edu.sa/bitstream/10754/655895/1/Paper%233_Fully%20Inkjet-Printed%20Photodetector%20Using%20a%20Graphene-Perovskite-Graphene%20Heterostructure.pdf

Cite this

@article{6b19fe9b55ab4795ac9e642df60ed766,

title = "Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure",

abstract = "Photodetectors (PDs) based on organic-inorganic hybrid materials such as graphene and perovskites have recently emerged at the forefront of the research in optoelectronic devices. Despite the remarkable progress in the performance of optoelectronic devices based on hybrid materials, some aspects such as stability have so far not been thoroughly addressed. This paper serves to demonstrate a fully inkjet-printed PD fabricated by hybrid perovskite (CH3NH3PbClx-3I3) layer between the two graphene electrodes as graphene/perovskite/graphene (GPG) heterostructure. The fully inkjet-printed GPG PD is found to be effective for the visible light region, which can be attributed by the high uniformity and low defects of the printed materials. Thus, the GPG PD achieves a high responsivity of 0.53 A/W. Fully inkjet-printed hybrid perovskite PD demonstrated in this paper unveils the facile, potentially large-scale and cost-effective methods for fabrication of hybrid perovskites-based optoelectronic devices, including PDs and solar cells.",

author = "Alamri, {Amal M.} and Siu Leung and Mohammad Vaseem and Atif Shamim and Jr-Hau He",

note = "KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: This work was supported in part by the King Abdulaziz City for Science and Technology (KACST) under Grant 1-17-02-002-004 and in part by the King Abdullah University of Science and Technology (KAUST).",

year = "2019",

month = jun,

doi = "10.1109/TED.2019.2911715",

language = "English (US)",

volume = "66",

pages = "2657--2661",

journal = "IEEE Transactions on Electron Devices",

issn = "0018-9383",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "6",

}

TY - JOUR

T1 - Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure

AU - Alamri, Amal M.

AU - Leung, Siu

AU - Vaseem, Mohammad

AU - Shamim, Atif

AU - He, Jr-Hau

N1 - KAUST Repository Item: Exported on 2020-10-01 Acknowledgements: This work was supported in part by the King Abdulaziz City for Science and Technology (KACST) under Grant 1-17-02-002-004 and in part by the King Abdullah University of Science and Technology (KAUST).

PY - 2019/6

Y1 - 2019/6

N2 - Photodetectors (PDs) based on organic-inorganic hybrid materials such as graphene and perovskites have recently emerged at the forefront of the research in optoelectronic devices. Despite the remarkable progress in the performance of optoelectronic devices based on hybrid materials, some aspects such as stability have so far not been thoroughly addressed. This paper serves to demonstrate a fully inkjet-printed PD fabricated by hybrid perovskite (CH3NH3PbClx-3I3) layer between the two graphene electrodes as graphene/perovskite/graphene (GPG) heterostructure. The fully inkjet-printed GPG PD is found to be effective for the visible light region, which can be attributed by the high uniformity and low defects of the printed materials. Thus, the GPG PD achieves a high responsivity of 0.53 A/W. Fully inkjet-printed hybrid perovskite PD demonstrated in this paper unveils the facile, potentially large-scale and cost-effective methods for fabrication of hybrid perovskites-based optoelectronic devices, including PDs and solar cells.

AB - Photodetectors (PDs) based on organic-inorganic hybrid materials such as graphene and perovskites have recently emerged at the forefront of the research in optoelectronic devices. Despite the remarkable progress in the performance of optoelectronic devices based on hybrid materials, some aspects such as stability have so far not been thoroughly addressed. This paper serves to demonstrate a fully inkjet-printed PD fabricated by hybrid perovskite (CH3NH3PbClx-3I3) layer between the two graphene electrodes as graphene/perovskite/graphene (GPG) heterostructure. The fully inkjet-printed GPG PD is found to be effective for the visible light region, which can be attributed by the high uniformity and low defects of the printed materials. Thus, the GPG PD achieves a high responsivity of 0.53 A/W. Fully inkjet-printed hybrid perovskite PD demonstrated in this paper unveils the facile, potentially large-scale and cost-effective methods for fabrication of hybrid perovskites-based optoelectronic devices, including PDs and solar cells.

UR - http://hdl.handle.net/10754/655895

UR - https://ieeexplore.ieee.org/document/8715735/

UR - http://www.scopus.com/inward/record.url?scp=85065987443&partnerID=8YFLogxK

U2 - 10.1109/TED.2019.2911715

DO - 10.1109/TED.2019.2911715

M3 - Article

SN - 0018-9383

VL - 66

SP - 2657

EP - 2661

JO - IEEE Transactions on Electron Devices

JF - IEEE Transactions on Electron Devices

IS - 6

ER -

Fully Inkjet-Printed Photodetector Using a Graphene/Perovskite/Graphene Heterostructure

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this