Experimental study of the inverse diffusion flame using high repetition rate OH/acetone PLIF and PIV

Research output: Contribution to journalArticlepeer-review

42 Scopus citations

Abstract

Most previous work on inverse diffusion flames (IDFs) has focused on laminar IDF emissions and the soot formation characteristics. Here, we investigate the characteristics and structure of methane IDFs using high speed planar laser-induced fluorescence (PLIF) images of OH, particle image velocimetry (PIV), and acetone PLIF imaging for non-reacting cases. First, the flame appearance was investigated with fixed methane loading (mass flux) but with varying airflow rates, yielding a central air jet Reynolds number (Re) of 1,000 to 6,000 (when blow-off occurs). Next, it was investigated a fixed central air jet Re of 4500, but with varied methane mass flux such that the global equivalence ratio spanned 0.5 to 4. It was observed that at Re smaller than 2000, the inner air jet promotes the establishment of an inverse diffusion flame surrounded by a normal diffusion flame. However, when the Re was increased to 2500, two distinct zones became apparent in the flame, a lower entrainment zone and an upper mixing and combustion zone. 10 kHz OH-PLIF images, and 2D PIV allow the identification of the fate and spatial flame structure. Many flame features were identified and further analyzed using simple but effective image processing methods, where three types of structure in all the flames investigated here: flame holes or breaks; closures; and growing kernels. Insights about the rate of evolution of these features, the dynamics of local extinction, and the sequence of events that lead to re-ignition are reported here. In the lower entrainment zone, the occurrence of the flame break events is counterbalanced by closure events, and the edge propagation appears to control the rate at which the flame holes and closures propagate. The rate of propagation of holes was found to be statistically faster than the rate of closure. As the flames approach blow-off, flame kernels become the main mechanism for flame re-ignition further downstream. The simultaneous OH-PLIF/Stereo PIV measurements indicate that the individual breaks events could be correlated to local vortical flow structure and strain rates fields. The detailed measurements provide a more complete understanding of IDF flame characteristics and structure than was previously possible.
Original languageEnglish (US)
Pages (from-to)447-461
Number of pages15
JournalFuel
Volume165
DOIs
StatePublished - Oct 30 2015

Bibliographical note

KAUST Repository Item: Exported on 2020-10-01

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Organic Chemistry
  • General Chemical Engineering
  • Fuel Technology

Fingerprint

Dive into the research topics of 'Experimental study of the inverse diffusion flame using high repetition rate OH/acetone PLIF and PIV'. Together they form a unique fingerprint.

Cite this