Cr-doped ZnO prepared by electrochemical deposition

C. J. Lan, J. S. Tsay, C. K. Lo, C. A. Lin, J. H. He, R. J. Chung

Research output: Contribution to journalArticlepeer-review

12 Scopus citations

Abstract

This study demonstrated the preparation of a Cr-doped ZnO wurtzite structure without any impurity phases (metallic Zn, Cr, Zn(OH)2, ZnCrO4, etc.) via electrodeposition. The surface morphology, lattice structure, Cr content, chemical binding characteristics, and optical properties of the deposits were examined by field-emission-scanning electron microscopy, X-ray diffraction, inductive coupled plasma mass spectroscopy, X-ray photoelectron spectroscopy, UV-visible spectroscopy, and photoluminescence, respectively. Cr-doped ZnO in the shape of hexangular columns appears when the applied potential is equal to or more positive than -1.2 VSSCE. The thickness of the deposits was within the range of 1.07-2.25 μm. Cr was in its trivalent state in the ZnO lattice. Both the high concentration of Cr ions in baths and the more negative applied potential impede the formation of the ZnO(002) plane. The redshift of the bandgap of the deposits from 3.31 to 3.18 eV occurs after the introduction of Cr impurity into the ZnO lattice. The photoluminescence results show both UV and visible light emissions from the electrodeposited specimens.

Original languageEnglish (US)
Pages (from-to)D559-D563
JournalJOURNAL OF THE ELECTROCHEMICAL SOCIETY
Volume157
Issue number11
DOIs
StatePublished - 2010
Externally publishedYes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Renewable Energy, Sustainability and the Environment

Fingerprint

Dive into the research topics of 'Cr-doped ZnO prepared by electrochemical deposition'. Together they form a unique fingerprint.

Cite this