Control of photoluminescence emission from a conjugated polymer using an optimised microcavity structure

D. G. Lidzey; M. A. Pate; D. M. Whittaker; D. D.C. Bradley; T. A. Fisher; M. S. Skolnick

doi:10.1016/S0009-2614(96)01258-4

Control of photoluminescence emission from a conjugated polymer using an optimised microcavity structure

D. G. Lidzey, M. A. Pate, D. M. Whittaker, D. D.C. Bradley, T. A. Fisher, M. S. Skolnick

Research output: Contribution to journal › Article › peer-review

39 Scopus citations

Abstract

It is shown that by careful control of the position of a thin emissive polymer layer {poly(p-phenylene vinylene) [PPV]} within a microcavity structure, it is possible to strongly influence the forward photoluminescence (PL) emission intensity. In one structure, the PPV layer was placed at a confined photon-field antinode where the coupling strength between the emitting dipoles and the field is expected to be a maximum. This resulted in an enhancement of the PL emitted into the forward direction. Placing the PPV layer at a photon-field node resulted in strong suppression of PL. The ratio of the forward emission intensity between these two extreme cases was 55 ± 25. The measured emission intensities are compared to predictions from a transfer matrix model and are shown to be in very reasonable agreement.

Original language	English (US)
Journal	IEE Colloquium (Digest)
Volume	263
Issue number	5
DOIs	https://doi.org/10.1016/S0009-2614(96)01258-4
State	Published - Dec 20 1996
Externally published	Yes

Bibliographical note

Generated from Scopus record by KAUST IRTS on 2019-11-27

Access to Document

10.1016/S0009-2614(96)01258-4

Cite this

@article{0bf3f68e7176486183610051e1a9058b,

title = "Control of photoluminescence emission from a conjugated polymer using an optimised microcavity structure",

abstract = "It is shown that by careful control of the position of a thin emissive polymer layer {poly(p-phenylene vinylene) [PPV]} within a microcavity structure, it is possible to strongly influence the forward photoluminescence (PL) emission intensity. In one structure, the PPV layer was placed at a confined photon-field antinode where the coupling strength between the emitting dipoles and the field is expected to be a maximum. This resulted in an enhancement of the PL emitted into the forward direction. Placing the PPV layer at a photon-field node resulted in strong suppression of PL. The ratio of the forward emission intensity between these two extreme cases was 55 ± 25. The measured emission intensities are compared to predictions from a transfer matrix model and are shown to be in very reasonable agreement.",

author = "Lidzey, {D. G.} and Pate, {M. A.} and Whittaker, {D. M.} and Bradley, {D. D.C.} and Fisher, {T. A.} and Skolnick, {M. S.}",

note = "Generated from Scopus record by KAUST IRTS on 2019-11-27",

year = "1996",

month = dec,

day = "20",

doi = "10.1016/S0009-2614(96)01258-4",

language = "English (US)",

volume = "263",

journal = "IEE Colloquium (Digest)",

issn = "0963-3308",

publisher = "Institute of Electrical Engineers",

number = "5",

}

TY - JOUR

T1 - Control of photoluminescence emission from a conjugated polymer using an optimised microcavity structure

AU - Lidzey, D. G.

AU - Pate, M. A.

AU - Whittaker, D. M.

AU - Bradley, D. D.C.

AU - Fisher, T. A.

AU - Skolnick, M. S.

N1 - Generated from Scopus record by KAUST IRTS on 2019-11-27

PY - 1996/12/20

Y1 - 1996/12/20

N2 - It is shown that by careful control of the position of a thin emissive polymer layer {poly(p-phenylene vinylene) [PPV]} within a microcavity structure, it is possible to strongly influence the forward photoluminescence (PL) emission intensity. In one structure, the PPV layer was placed at a confined photon-field antinode where the coupling strength between the emitting dipoles and the field is expected to be a maximum. This resulted in an enhancement of the PL emitted into the forward direction. Placing the PPV layer at a photon-field node resulted in strong suppression of PL. The ratio of the forward emission intensity between these two extreme cases was 55 ± 25. The measured emission intensities are compared to predictions from a transfer matrix model and are shown to be in very reasonable agreement.

AB - It is shown that by careful control of the position of a thin emissive polymer layer {poly(p-phenylene vinylene) [PPV]} within a microcavity structure, it is possible to strongly influence the forward photoluminescence (PL) emission intensity. In one structure, the PPV layer was placed at a confined photon-field antinode where the coupling strength between the emitting dipoles and the field is expected to be a maximum. This resulted in an enhancement of the PL emitted into the forward direction. Placing the PPV layer at a photon-field node resulted in strong suppression of PL. The ratio of the forward emission intensity between these two extreme cases was 55 ± 25. The measured emission intensities are compared to predictions from a transfer matrix model and are shown to be in very reasonable agreement.

UR - https://linkinghub.elsevier.com/retrieve/pii/S0009261496012584

UR - http://www.scopus.com/inward/record.url?scp=3142537880&partnerID=8YFLogxK

U2 - 10.1016/S0009-2614(96)01258-4

DO - 10.1016/S0009-2614(96)01258-4

M3 - Article

SN - 0963-3308

VL - 263

JO - IEE Colloquium (Digest)

JF - IEE Colloquium (Digest)

IS - 5

ER -

Control of photoluminescence emission from a conjugated polymer using an optimised microcavity structure

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this