Application of aberration-corrected scanning transmission electron microscopy in conjunction with valence electron energy loss spectroscopy for the nanoscale mapping of the elastic properties of Al–Li–Cu alloys

Muna S. Khushaim, Dalaver H. Anjum

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

The stress and strain play an important role in strengthening of the precipitation-hardened Aluminum (Al) alloys. Despite the determination of relationship between the mechanical properties and the precipitation existing in the microstructure of these alloys, a quantitative analysis of the local stress and the strain fields at the hardening-precipitates level has been seldom reported. In this paper, the microstructure of a T8 temper AA2195 Al alloy is investigated using aberration corrected scanning transmission electron microscopy (AC-STEM). The strain fields in Al matrix in the vicinity of observed precipitates, namely T1 and β′, are determined using geometric phase analysis (GPA). Young's modulus (Ym) mapping of the corresponding areas is determined from the valence electron energy loss spectroscopy (VEELS) measured bulk Plasmon energy (Ep) of the alloys. The GPA-determined strains were then combined with VEELS-determined Ym under the linear theory of elasticity to give rise the local stresses in the alloy. The obtained results show that the local stresses in Al matrix having no precipitates were in the range of 138 ± 2 MPa. Whereas, in the vicinity of thin and thick T1 platelet shape precipitates, the stresses were found to be about 202 ± 3 MPa and 195 ±3 MPa, respectively. The stresses measured in the vicinity of β′ spherical shape precipitates found out to be 140 ± 3 MPa which was near to the local stress value in Al matrix. Our findings suggest that the precipitate hardening in T8 temper AA2195 Al alloy predominantly stems from thin T1 precipitates.
Original languageEnglish (US)
JournalMicroscopy Research and Technique
DOIs
StatePublished - Nov 13 2020
Externally publishedYes

Bibliographical note

KAUST Repository Item: Exported on 2020-11-18
Acknowledgements: The authors would like to acknowledge Electron Microscopy Facilities at King Abdullah University of Science & Technology (KAUST) and Khalifa University (KU) for providing access to the instruments at their laboratories for carrying out the experiments with TEMs. This work is partially funded by Abu Dhabi Award for Research Excellence 2019 round (AARE-2019) under the Project No. AARE19-131.

Fingerprint

Dive into the research topics of 'Application of aberration-corrected scanning transmission electron microscopy in conjunction with valence electron energy loss spectroscopy for the nanoscale mapping of the elastic properties of Al–Li–Cu alloys'. Together they form a unique fingerprint.

Cite this