Abstract
A ratiometric luminescence intensity imaging approach is presented, which enables spatial O 2 measurements in biofilm reactors with transparent planar O 2 optodes. Optodes consist of an O 2 sensitive luminescent dye immobilized in a 1-10 μm thick polymeric layer on a transparent carrier, e.g. a glass window. The method is based on sequential imaging of the O 2 dependent luminescence intensity, which are subsequently normalized with luminescent intensity images recorded under anoxic conditions. We present 2-dimensional O 2 distribution images at the base of a tap water biofilm measured with the new ratiometric method and compare the results with O 2 distribution images obtained in the same biofilm reactor with luminescence lifetime imaging. Using conventional digital cameras, such simple normalized luminescence intensity imaging can yield images of 2-dimensional O 2 distributions with a high signal-to-noise ratio and spatial resolution comparable or even surpassing those obtained with expensive and complex luminescence lifetime imaging systems. The method can be applied to biofilm growth incubators allowing intermittent experimental shifts to anoxic conditions or in systems, in which the O 2 concentration is depleted during incubation.
| Original language | English (US) |
|---|---|
| Pages (from-to) | 5027-5037 |
| Number of pages | 11 |
| Journal | Water Research |
| Volume | 45 |
| Issue number | 16 |
| DOIs | |
| State | Published - Oct 15 2011 |
| Externally published | Yes |
Keywords
- Biofilm
- Imaging
- Lifetime
- Membrane fouling simulator
- Oxygen sensing
- Planar optodes
ASJC Scopus subject areas
- Water Science and Technology
- Waste Management and Disposal
- Pollution
- Ecological Modeling