A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications

Qurat Ul Ain; Danial Khan; Muhammad Basim; Syed Adil Ali Shah; Kang Yoon Lee

doi:10.1109/ICEIC54506.2022.9748436

A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications

Qurat Ul Ain, Danial Khan, Muhammad Basim, Syed Adil Ali Shah, Kang Yoon Lee

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Scopus citations

Abstract

This work proposes a ramp generator with ramp trimming control bits for a quick response of PWM DC-DC buck converter for IoT applications. Due to the addition of ramp trimming control bits, the ramp frequency of 2 MHz has been achieved. The frequency range is from 1.41 MHz to 3.998 MHz for the control bits from to . A 2 MHz frequency has been achieved for the control bit . The output voltage of 1.2V has been achieved with an input voltage of 1.8 V. The load current supplied is between 0-200 mA. The proposed DC-DC buck converter is designed in a 180 nm CMOS process with an active area of 200 μm X 170 μm.

Original language	English (US)
Title of host publication	2022 International Conference on Electronics, Information, and Communication, ICEIC 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Print)	9781665409346
DOIs	https://doi.org/10.1109/ICEIC54506.2022.9748436
State	Published - Jan 1 2022
Externally published	Yes

Bibliographical note

Generated from Scopus record by KAUST IRTS on 2023-09-23

Access to Document

10.1109/ICEIC54506.2022.9748436

Cite this

Ul Ain, Q., Khan, D., Basim, M., Shah, S. A. A., & Lee, K. Y. (2022). A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications. In 2022 International Conference on Electronics, Information, and Communication, ICEIC 2022 Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEIC54506.2022.9748436

@inproceedings{214f732a7ff54a3bb8048d4ec89fade6,

title = "A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications",

abstract = "This work proposes a ramp generator with ramp trimming control bits for a quick response of PWM DC-DC buck converter for IoT applications. Due to the addition of ramp trimming control bits, the ramp frequency of 2 MHz has been achieved. The frequency range is from 1.41 MHz to 3.998 MHz for the control bits from to . A 2 MHz frequency has been achieved for the control bit . The output voltage of 1.2V has been achieved with an input voltage of 1.8 V. The load current supplied is between 0-200 mA. The proposed DC-DC buck converter is designed in a 180 nm CMOS process with an active area of 200 μm X 170 μm.",

author = "{Ul Ain}, Qurat and Danial Khan and Muhammad Basim and Shah, {Syed Adil Ali} and Lee, {Kang Yoon}",

note = "Generated from Scopus record by KAUST IRTS on 2023-09-23",

year = "2022",

month = jan,

day = "1",

doi = "10.1109/ICEIC54506.2022.9748436",

language = "English (US)",

isbn = "9781665409346",

booktitle = "2022 International Conference on Electronics, Information, and Communication, ICEIC 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

}

A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications. / Ul Ain, Qurat; Khan, Danial; Basim, Muhammad et al.
2022 International Conference on Electronics, Information, and Communication, ICEIC 2022. Institute of Electrical and Electronics Engineers Inc., 2022.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

TY - GEN

T1 - A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications

AU - Ul Ain, Qurat

AU - Khan, Danial

AU - Basim, Muhammad

AU - Shah, Syed Adil Ali

AU - Lee, Kang Yoon

N1 - Generated from Scopus record by KAUST IRTS on 2023-09-23

PY - 2022/1/1

Y1 - 2022/1/1

N2 - This work proposes a ramp generator with ramp trimming control bits for a quick response of PWM DC-DC buck converter for IoT applications. Due to the addition of ramp trimming control bits, the ramp frequency of 2 MHz has been achieved. The frequency range is from 1.41 MHz to 3.998 MHz for the control bits from to . A 2 MHz frequency has been achieved for the control bit . The output voltage of 1.2V has been achieved with an input voltage of 1.8 V. The load current supplied is between 0-200 mA. The proposed DC-DC buck converter is designed in a 180 nm CMOS process with an active area of 200 μm X 170 μm.

AB - This work proposes a ramp generator with ramp trimming control bits for a quick response of PWM DC-DC buck converter for IoT applications. Due to the addition of ramp trimming control bits, the ramp frequency of 2 MHz has been achieved. The frequency range is from 1.41 MHz to 3.998 MHz for the control bits from to . A 2 MHz frequency has been achieved for the control bit . The output voltage of 1.2V has been achieved with an input voltage of 1.8 V. The load current supplied is between 0-200 mA. The proposed DC-DC buck converter is designed in a 180 nm CMOS process with an active area of 200 μm X 170 μm.

UR - https://ieeexplore.ieee.org/document/9748436/

UR - http://www.scopus.com/inward/record.url?scp=85128859587&partnerID=8YFLogxK

U2 - 10.1109/ICEIC54506.2022.9748436

DO - 10.1109/ICEIC54506.2022.9748436

M3 - Conference contribution

SN - 9781665409346

BT - 2022 International Conference on Electronics, Information, and Communication, ICEIC 2022

PB - Institute of Electrical and Electronics Engineers Inc.

ER -

A Design of Ramp Generator With Ramp trimming Control Bits in DC DC Buck Converter for IoT Applications

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this