3D Printed Electromagnetic Micropump for Implantable Drug Delivery

Haoliang Lu; Selma Amara; Khalil Moussi; Sofiane Benmbarek; Ahmad Ainine; Hossein Fariborzi

doi:10.1109/ICCE53296.2022.9730456

3D Printed Electromagnetic Micropump for Implantable Drug Delivery

Haoliang Lu, Selma Amara, Khalil Moussi, Sofiane Benmbarek, Ahmad Ainine, Hossein Fariborzi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

This paper introduces an electromagnetic micropump for drug delivery applications. The diffuser-nozzle structure allows a valveless unidirectional flow. The performance of the electromagnetic actuator is investigated theoretically and evaluated experimentally. More importantly, we present a proper compromise between the device miniaturization and the electromagnetic pumping force for implantable drug delivery applications. For an input current and voltage of 160 mA and 4.6 V, respectively, the micropump produces a flow rate of 1.2174 ± 0.0041 μl/s. The low power consumption, small size, and precise flow rate make the proposed micropump suitable for implantable drug delivery applications.

Original language	English (US)
Title of host publication	2022 IEEE International Conference on Consumer Electronics, ICCE 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781665441544
DOIs	https://doi.org/10.1109/ICCE53296.2022.9730456
State	Published - 2022
Event	2022 IEEE International Conference on Consumer Electronics, ICCE 2022 - Virtual, Online, United States Duration: Jan 7 2022 → Jan 9 2022

Publication series

Name	Digest of Technical Papers - IEEE International Conference on Consumer Electronics
Volume	2022-January
ISSN (Print)	0747-668X

Conference

Conference	2022 IEEE International Conference on Consumer Electronics, ICCE 2022
Country/Territory	United States
City	Virtual, Online
Period	01/7/22 → 01/9/22

Bibliographical note

Publisher Copyright:
© 2022 IEEE.

Keywords

diffuser-nozzle
drug delivery
electromagnetic actuator
implantable
micropump

ASJC Scopus subject areas

Industrial and Manufacturing Engineering
Electrical and Electronic Engineering

Access to Document

10.1109/ICCE53296.2022.9730456

Cite this

Lu, H., Amara, S., Moussi, K., Benmbarek, S., Ainine, A., & Fariborzi, H. (2022). 3D Printed Electromagnetic Micropump for Implantable Drug Delivery. In 2022 IEEE International Conference on Consumer Electronics, ICCE 2022 (Digest of Technical Papers - IEEE International Conference on Consumer Electronics; Vol. 2022-January). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICCE53296.2022.9730456

@inproceedings{10535826b4c0408c84e26adf400694e0,

title = "3D Printed Electromagnetic Micropump for Implantable Drug Delivery",

abstract = "This paper introduces an electromagnetic micropump for drug delivery applications. The diffuser-nozzle structure allows a valveless unidirectional flow. The performance of the electromagnetic actuator is investigated theoretically and evaluated experimentally. More importantly, we present a proper compromise between the device miniaturization and the electromagnetic pumping force for implantable drug delivery applications. For an input current and voltage of 160 mA and 4.6 V, respectively, the micropump produces a flow rate of 1.2174 ± 0.0041 μl/s. The low power consumption, small size, and precise flow rate make the proposed micropump suitable for implantable drug delivery applications.",

keywords = "diffuser-nozzle, drug delivery, electromagnetic actuator, implantable, micropump",

author = "Haoliang Lu and Selma Amara and Khalil Moussi and Sofiane Benmbarek and Ahmad Ainine and Hossein Fariborzi",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 IEEE International Conference on Consumer Electronics, ICCE 2022 ; Conference date: 07-01-2022 Through 09-01-2022",

year = "2022",

doi = "10.1109/ICCE53296.2022.9730456",

language = "English (US)",

series = "Digest of Technical Papers - IEEE International Conference on Consumer Electronics",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2022 IEEE International Conference on Consumer Electronics, ICCE 2022",

address = "United States",

}

Lu, H, Amara, S, Moussi, K, Benmbarek, S, Ainine, A & Fariborzi, H 2022, 3D Printed Electromagnetic Micropump for Implantable Drug Delivery. in 2022 IEEE International Conference on Consumer Electronics, ICCE 2022. Digest of Technical Papers - IEEE International Conference on Consumer Electronics, vol. 2022-January, Institute of Electrical and Electronics Engineers Inc., 2022 IEEE International Conference on Consumer Electronics, ICCE 2022, Virtual, Online, United States, 01/7/22. https://doi.org/10.1109/ICCE53296.2022.9730456

3D Printed Electromagnetic Micropump for Implantable Drug Delivery. / Lu, Haoliang; Amara, Selma; Moussi, Khalil et al.
2022 IEEE International Conference on Consumer Electronics, ICCE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. (Digest of Technical Papers - IEEE International Conference on Consumer Electronics; Vol. 2022-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - 3D Printed Electromagnetic Micropump for Implantable Drug Delivery

AU - Lu, Haoliang

AU - Amara, Selma

AU - Moussi, Khalil

AU - Benmbarek, Sofiane

AU - Ainine, Ahmad

AU - Fariborzi, Hossein

PY - 2022

Y1 - 2022

N2 - This paper introduces an electromagnetic micropump for drug delivery applications. The diffuser-nozzle structure allows a valveless unidirectional flow. The performance of the electromagnetic actuator is investigated theoretically and evaluated experimentally. More importantly, we present a proper compromise between the device miniaturization and the electromagnetic pumping force for implantable drug delivery applications. For an input current and voltage of 160 mA and 4.6 V, respectively, the micropump produces a flow rate of 1.2174 ± 0.0041 μl/s. The low power consumption, small size, and precise flow rate make the proposed micropump suitable for implantable drug delivery applications.

AB - This paper introduces an electromagnetic micropump for drug delivery applications. The diffuser-nozzle structure allows a valveless unidirectional flow. The performance of the electromagnetic actuator is investigated theoretically and evaluated experimentally. More importantly, we present a proper compromise between the device miniaturization and the electromagnetic pumping force for implantable drug delivery applications. For an input current and voltage of 160 mA and 4.6 V, respectively, the micropump produces a flow rate of 1.2174 ± 0.0041 μl/s. The low power consumption, small size, and precise flow rate make the proposed micropump suitable for implantable drug delivery applications.

KW - diffuser-nozzle

KW - drug delivery

KW - electromagnetic actuator

KW - implantable

KW - micropump

UR - http://www.scopus.com/inward/record.url?scp=85127071726&partnerID=8YFLogxK

U2 - 10.1109/ICCE53296.2022.9730456

DO - 10.1109/ICCE53296.2022.9730456

M3 - Conference contribution

AN - SCOPUS:85127071726

T3 - Digest of Technical Papers - IEEE International Conference on Consumer Electronics

BT - 2022 IEEE International Conference on Consumer Electronics, ICCE 2022

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 IEEE International Conference on Consumer Electronics, ICCE 2022

Y2 - 7 January 2022 through 9 January 2022

ER -

Lu H, Amara S, Moussi K, Benmbarek S, Ainine A, Fariborzi H. 3D Printed Electromagnetic Micropump for Implantable Drug Delivery. In 2022 IEEE International Conference on Consumer Electronics, ICCE 2022. Institute of Electrical and Electronics Engineers Inc. 2022. (Digest of Technical Papers - IEEE International Conference on Consumer Electronics). doi: 10.1109/ICCE53296.2022.9730456

3D Printed Electromagnetic Micropump for Implantable Drug Delivery

Abstract

Publication series

Conference

Bibliographical note

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this